The planning and manufacturing of signs can enhance the cultural style of the brand. So how can we make high-quality signs? The following are the requirements of the industry for the manufacturing process of the signs and labels, so as to assist the enterprises that need to manufacture the signs to distinguish the superior and inferior signs.
鋁合金型 要求
Aluminum alloy type requirements
1. 鋁合金和常用塑膠材料配件應契合質量要求。
1. Aluminum alloy and common plastic material fittings shall meet the quality requirements.
2. 鋁合金型材的角底誤差少于正負誤差1度。
2. The angle bottom error of aluminum alloy profile is less than 1 degree of positive and negative error.
3. 平面間隙<=0.4%*B(B為型材寬度)。
3. Plane clearance < = 0.4% * B (B is profile width).
亞克力型 加工的要求
Requirements for acrylic processing
1. 亞克力出模熱彎成形，尺度與形狀共同，外表無氣泡、劃痕。
1. Acrylic hot bending, with the same size and shape, without bubbles and scratches on the surface.
2. 熱彎成形后外表經過粗砂、細砂、碾磨處理，保證外表滑潤。
2. After hot bending, the surface shall be treated with coarse sand, fine sand and grinding to ensure smooth surface.
3. 完成后外表光澤柔軟均勻、無顆粒狀物、透光均勻。
3. After completion, the surface luster is soft and uniform, without particles and uniform light transmission.
不銹鋼型 工藝要求
Stainless steel process requirements
1. 不銹鋼板須刨坑折彎焊接；保證折彎處圓弧角R＜1mm。
1. The stainless steel plate shall be planed, bent and welded; the arc angle R at the bending position shall be less than 1mm.
2. 焊接前外表油污，削減焊縫構成的虛焊、氣孔、裂紋等缺點。
2. Before welding, remove the oil stain on the surface, and reduce the defects such as faulty welding, air hole, crack and so on.
3. 焊接完后將一切可見焊縫打磨光滑，與周圍外表相同滑潤，無顯著劃痕。
3. After welding, all visible welds shall be polished to be smooth, as smooth as the surrounding surface, without significant scratches.
烤漆 工藝要求
Paint baking process requirements
1. 清洗外表劣留物，補灰、打磨等外表處理。
1. Clean the surface defects, make up the ash, polish and other surface treatment.
2. 烤漆房須無塵土顆粒車間，烤漆外表涂層三涂三烤處理，涂層厚度大于或等于35微米。
2. The paint room shall be dust-free workshop, and the external coating of the paint shall be painted three times and baked three times, with the coating thickness greater than or equal to 35 microns.
3. 面漆膜應滑潤、均勻，無流痕、皺紋、桔皮、氣泡、夾雜等影響裝修作用的缺點。
3. The top coat film shall be smooth and even without flow marks, wrinkles, orange peel, bubbles, inclusions and other defects affecting the decoration effect.
絲印 工藝要求
Silk screen printing process requirements
1. 菲林沖制網版，絲印外表用酒精或白電油將外表清理干凈。
1. The screen is made of phenanthrene, and the surface of silk screen is cleaned with alcohol or white electric oil.
2. 絲印色彩契合規劃方案要求，字體及圖畫筆劃清晰，無變形、鋸齒等。
2. The silk screen color meets the requirements of the planning scheme, and the font and picture strokes are clear without deformation, sawtooth, etc.
3. 絲印圖形文字色彩與底色無顯著浸透現象。
3. There is no significant saturation between the color of silk screen graphics and the background color.
竣工外觀要求
Finished appearance requirements
1. 竣工后標識牌外觀精巧，無劃痕、氣泡、顯著的色彩不均，烤漆無顯著色差，所用材料契合規劃方案。
1. After the completion of the project, the sign board shall be exquisite in appearance, free of scratches, bubbles, significant color unevenness, no significant color difference in the baking paint, and the materials used shall conform to the planning scheme.
2. 標牌裝置方式便于面板更換及保護。
2. The sign device is convenient for panel replacement and protection.
