Generally speaking, there are quite a large number of ink-jet advertisements. The ink-jet interface is exquisite and real, and the restoration degree is very high. However, if the general processing method is not correct, it will cause rapid fading, and the fading ink-jet advertisements can not achieve the actual effect of the original propaganda planning. Today, the editor is here to explain the reasons for the fading of the ink-jet advertisements. Prevention in many ways.
噴繪藝術照廣告以便做到超清，色飽和度好，一般選用的黑墨水全是水溶性黑墨水，就算一些噴繪廣告干了過膜，也難以避免的受著防潮和紫外光的困惑。噴繪廣告褪色關鍵原因小結以下內容。
In order to achieve super clear and good color saturation, the general black ink is water-soluble black ink. Even if some ink-jet advertisements are dried, it is difficult to avoid the confusion of moisture-proof and ultraviolet light. The key reasons for the fading of spray painting advertisements are summarized as follows.
1.噴繪廣告長期性在紫外線照射自然環境下能褪色
1. Spray painting advertisement can fade under ultraviolet radiation for a long time
2.噴繪廣告的黑墨水與別的化學物質產生化學反應造成褪色
2. The black ink of spray painting advertisement reacts with other chemicals to cause fading
3.噴繪廣告在太陽白曬和日曬雨淋自然環境下的脆化而褪色
3. The embrittlement and fading of spray painting advertisements in the natural environment of sunlight and rain
4.噴繪廣告在房間內，若是曝露在紫外光超標準的照明燈具下時間長也會造成褪色
4. Spray painting advertisement in the room, if exposed to ultra standard UV lighting for a long time, it will also cause fading
5.噴繪廣告的噴繪畫板品質決策褪色水平，吸墨性和滲墨性就越好，它對廣告上應用黑墨水的使用壽命也就越長。
5. The quality of the inkjet board of the inkjet advertisement determines the fading level, the better the ink absorption and ink penetration, and the longer the service life of the black ink used in the advertisement.
6.噴繪廣告的過膜原材料鍍層上若是有金屬氧化物也導致褪色
6. If there is metal oxide on the coating of the coated raw material of spray painting advertisement, it will also lead to fading
7.噴繪廣告在過膜時，要確保噴繪藝術照黑墨水徹底干躁，不然也會凝固界面造成褪色。
7. Make sure that the black ink of the ink-jet art photo is completely dry when the ink-jet advertisement passes through the film, otherwise it will solidify the interface and cause discoloration.
